Victor S Series
Self-priming pumps are a versatile solution to negative suction head applications. These pumps are typically horizontal, one-stage, centrifugal design with an open impeller handling large solids.
A foot valve is not necessary as the pumps prime and re-prime themselves automatically to depths over 7,5 meters (25 feet). Often fitted with easily replaceable wear plates, the pumps have a high resistance to abrasion. The casings usually include large covers that can be used for inspecting the impeller or for removing blockages.
These pumps are normally equipped with externally lubricated mechanical seals with hard faces to prevent seal damage during dry running. Pumps are available in cast iron, stainless steel fitted, all stainless steel or bronze as applications require.
These pumps are especially useful when applications require:
- Quick self-priming
- Handling large diameter solids
- High abrasive resistance
- Dry running
- Long life
Self-priming pumps are used in:
- Waste treatment
- Environmental protection
- Ship building
- Construction industry
- Civil engineering
- Large re-fuelling systems
- ATEX option
Victor R Series
The Victor R series of internal gear pumps are used for fluids of any viscosity.
Solvents up to 1mm2/s, chocolate (max 100,000 mm2/s) or bitumen can be pumped without any problem.
Their special design also makes them suitable for lubricating and non-lubricating fluids as well as for liquids with solids or abrasive particles such as coloured pigments.
R Series pumps are used in several industries such as: petrochemical, paint and resin, soap and detergent, food, chocolate and paper.
R Series pumps are positive displacement, rotary, internal gear. The capacity is directly proportional to the rotation speed and almost independent of the pressure. The flow is smooth and non-pulsating in either direction.
Depending on the application, the pump will be supplied with a packed gland or a mechanical seal mounted single, single with quench, double in tandem, double back-to-back or with a magnetic coupling.
The R Series pumps are manufactured in cast iron or stainless steel. Special materials or material combinations can be used when necessary. The pumps can be equipped with heating jackets and relief valves or a combination of both.
R Series pumps can be used best in one or more of the following circumstances:
- Lubrication duties
- Pumping palm oil, corn oil, soya oil, rape oil and pyrolitic oil
- Adhesive metering
- Ethanol and methanol
- Off-loading bulk chemicals from 20 tonne tankers
- Heavy fuel oil
- Bulk tanker off-loading of viscous resins
- Emptying and filling locomotive engine tanks
- Dispensing lacquers
- For pumping lubrication and glycol
- Bulk fuel transfer
- Gearbox lubrication
- Oil lubrication duties
- Chocolate pumping
- Bio-fuel transfer
- ATEX option
Need Technical Specifications?
Send a message to one of our pump experts
Ready to discuss your pumping application?